UDC CrMO Cotterless Hub – 36 Hole

£30.90

Super hard hub specially produced for Unicycle.com with wider flange spacings for a lot stronger wheel.

This is probably the strongest cotterless hub you can get for a unicycle, as fitted to Trainer unicycles and pre-ISIS Nimbus unicycles.

Only 3 left in stock

SKU: HubCrMO36

The wider the flanges are spaced the stronger the wheel, these flanges are placed as wide as they can be without changing the bearing positions.

The spoke holes fit 14 gauge spokes but can be drilled out to fit 12 gauge spokes.

Will fit most unicycles except Dodgers and Pashley’s.

If you are not sure contact us before ordering.

Comes with bearings and a pair of high tensile bolts.

Hub flange width (W) = 71.5mm

Hub flange Diameter (D) = 56mm

Hub hole Diameter (S) = 2.8mm

Information on the spoke length for building a wheel can be found on our Spoke Calculator