24" Nimbus E-Sport Race Unicycle - Black
Super light 24" Nimbus E-Sport Race unicycle that conforms with the IUF regulations for racing.
The Nimbus E-Sport race unicycle is at the top of its game with the best unicycle parts and newest technologies. Comes with the latest generation Nimbus one-piece aluminium (90mm wide) hub for optimum race performance and durability. The super stiff Nimbus VCX cranks give the most efficient transfer of power directly to your wheel, meaning all your power goes solely into propelling you forward to victory. The Nimbus aluminium E-Sport frame is narrow enough at the top to minimise catching your knees but still has enough crown to enable a secure foot placement for one-foot riding. With the E-sport frame being 300mm long (from crown to top of seatpost) this puts the seatpost clamp nicely out of the way minimising any discomfort.
The E-Sport Race comes with a 559mm rim and a thin tyre. So, it is designed and optimized to ride on a track. This unicycle conforms to the IUF’s (International Unicycle Federation) Track racing rules and unicycle specifications 2B.2 See below for full details or click here to see IUF rule book document.
Wheel size: 559mm (IUF 24 Class)
Frame: 24" Nimbus E-Sport Aluminium Frame (300mm)
Saddle: Nimbus Classic Saddle - Black
Seatpost: Nimbus 'Aluminium' Seatpost (25.4) - 300mm
Seatpost Clamp: Nimbus Seatpost Clamp - Black (31.8mm)
Tyre: 25 x 1" (23-559) Kenda Koncept (Max pressure 110 PSI)
Valve: Presta Valve
Rim: Nimbus E-Sport 559 x 20 (40mm Aluminium Deep Section)
Hub: Nimbus ISIS Alu Hub - 36 Hole (90mm) - Black
Cranks: Nimbus VCX ISIS Cranks - 125mm
Pedals: Nimbus Plastic Pedals - White
Number of Spokes: 36 Holes
Weight: 4.4kg
Recommended leg length sizes for unicycle:
Standard seatpost: Minimum - 96cm (37.7"), Maximum - 115cm (45.2")
Cutdown seatpost: Minimum - 81cm (31.8")
These sizes are measured from crotch to floor wearing shoes
International Unicycle Federation Rule 2B.2 Unicycles
Only standard unicycles may be used. Riders may use different unicycles for different
racing events, as long as all comply with the rules for events in which they are entered.
For events divided by wheel size, there is a maximum allowable tire diameter and minimum
crank arm length for each category:
|
Unicycle Class |
Max Diameter |
Min Crank Length |
Transmission |
|
16 Class |
418mm |
89mm |
Standard |
|
20 Class |
518mm |
100mm |
Standard |
|
24 Class |
618mm |
125mm |
Standard |
|
29 Class |
778mm |
No Limit |
Standard |
|
Unlimited |
No Limit |
No Limit |
Unlimited |
Frequently Asked Questions and Answers
-
General Unicycle maintenance
Unicycles are not complicated but they do take a little bit of maintaining. Here are some of the key points:
Creaking Cranks
Stop riding immediately and tighten! If these are left they will destroy the cranks and hub. The creak comes ...
Read more -
Nimbus Unicycles Manufacturers Page
Nimbus Unicycles was started in 2001 and is the premier house brand of Unicycle.com.
The brand was started to help differentiate between our standard unicycles and the newer higher end unicycles we were designing in response to the requests fro...
Read more
