Availability: Out of stock
UDC 'Wide' CrMO Cotterless Hub - 36 Hole
Super wide extra-strong hub to replace the standard hub on Coker or other 36" unicycles.
This hub will really strengthen your 36" wheel. The hub is 28mm (1 inch) wider than a standard hub. The flanges are pitched at 100mm and the bearing spacing is at 5 inches (128mm). The spoke holes are big enough to fit the new 14 gauge spokes but can be drilled out to fit the old 12 gauge spokes. Built using the same technology that has made the now famous Super strong Unicycle.com CrMO Wide flange hub. Now with standard 40mm bearings. Comes with spacers, bearings and a pair of high tensile bolts. Hub flange width (W) = 98.5mm Hub flange Diameter (D) = 56mm Hub hole Diameter (S) = 2.6mm Information on the spoke length for building a wheel can be found on our Spoke Calculator
Write Your Own Review