20" Impact Reagent/Sylph Pro Frame - White (32mm)

This is the newest generation Reagent frame.

It may look very similar to the old Regaent frame but every curve and joint has been re-assesed, also a new manufacturing jig has been produced  to make the frame squarer.  Just looking at the frame you can see that there is a dramatic increase in quality over what was already one of the top street/flatland frames availale.
The Frame is made from 6061 T6 Aluminium and requires the new twin (32mm) bearing system (For compatability click here). These frames will be supplied with a set of 32mm bearings for a limited time, after that you can purchase below. The only change you will need to make, to convert your existing hub to fit this frame, is to change the outer bearing spacer from 6mm to 5mm.

*The exception is hubs fitted with Kris Holm Moment cranks, These require 6mm spacers instead of the original 8mm.
 
See a review on this frame from Impact Team rider Bobousse.

Weight: 610 grams

*These frames will only run 4x Bearings  - ISIS 32mm (22-32-7RS), you will need to convert your hub to 32mm bearings to fit this frame.