The d'brake disc brake mount will enable you to fit a disc brake to any Muni or big wheel frame. Now comes supplied with an anti-Vibration bar. You just remove your existing left hand bearing clamp and replace it with this beautifully crafted disc brake mount machined from 7075 Aluminium. The d'brake has been designed to have the disc running on the inside of the frame keeping it welll out the way and allowing the rider to use their existing cranks. The disc itself mounts directly onto a Nimbus Disc hub and then all you need is the disc brake itself and you are ready to go ride. With it's clever configuration it is designed to fit on almost any frame without machining.
- Anti Vibration bar
- 1 x extra long caliper bolt
- 2 x Cable ties (1 x big, 1 x small)
The Nimbus d'brake will also work mounted on the righthand side of your frame for use with the Kris Holm Spirit cranks.
The d'brake uses the IS (International standard, Front) two bolt configuration for cycle disc brakes. This allows you to run any caliper/disc combination without having to modify the mount in any way.
Note: We do not recomend using Avid Disc brakes as the caliper has been known to rub on the spokes.
Frequently Asked Questions and Answers
Nimbus d'brake Adaptor Instructions
Please select your instructions from the list below.
All our instructions are PDF based, you will need a PDF viewer to use the links below. We recommend Adobe Acrobat Reader, which is a free, trusted global standard for viewing PDFs. You can do...
Nimbus Unicycles Manufacturers Page
Nimbus Unicycles was started in 2001 and is the premier house brand of Unicycle.com.
The brand was started to help differentiate between our standard unicycles and the newer higher end unicycles we were designing in response to the requests fro...