So Staff Unicycles lets start with my trials unicycle 19" Nimbus Trials with few things change of course..
Lets start at the top and work our way down, First the saddle is the 2009 Kris Holm 'Street' saddle in orange with the Kris Holm Stiffener plate which makes the saddle extremely stiff the handle never moves unlike before.
[caption id="attachment_583" align="alignnone" width="531" caption=" "][/caption]
The frame is the only really bit left of the standard Nimbus Trials, its a Nimbus II frame in black with 42mm machined bearings. With the frame being black it matches the UDC bumper stickers with a little cutting round the letters and they fit perfectly on the Nimbus II frame.
[caption id="attachment_589" align="alignnone" width="560" caption=" "][/caption]
Now the seatpost and seatpost clamp ive got standard steel black seatpost that comes on the Club Freestyles not very trials but hey it was cheap and the seatpost clamp is a Nimbus 'Doublebolt' 25.4mm in orange
Next comes the shiny bits on my unicycle, it have the Kris Holm 2008 Wheelset this includes the 2008 rim with round holes not oval like the 2009, Black 13g spokes with stainless steel nipples all lined a 2008 Kris Holm ISIS hub. Because the standard blue Kris Holm rim tape doesnt really go with the rest of the unicycle i swapped that out of Koxx Carbon fiber rim tape and finally a Maxxis Creepy-Crawler tyre. (Might swap it for Nimbus Blizard later)
[caption id="attachment_590" align="alignnone" width="560" caption=" "][/caption]
Finally we have the cranks which are Kris Holm Moment cranks I've gone for the 125mm because the 137mm went on my Muni then finished off with the seventies pedals in yes you've got it by now orange.
And thats it one completed trials.. Tomorrow I'll post up Rogers prototype 36"