The Nimbus Bearing Puller has been designed to slip onto any sized Unicycle bearing and hub configuration (with the exception of the Eclipse Hub) and remove the bearing with little effort. The Bearing puller cups round half of the bearing stopping it from slipping off while in use.
Bearings on unicycles generally last a long time; even when you take your unicycle in a fountain, or the sea, or just splashing around in the mud. They do give up in the end though; normally at the worst moment possible (the middle of a Polaris Challenge event for me). You hear them grinding first, then when you turn the wheel slowly by hand you can feel the restriction in the movement.
Frequently Asked Questions and Answers
Nimbus Bearing Puller Instructions
Please select your instructions from the list below.
All our instructions are PDF based, you will need a PDF viewer to use the links below. We recommend Adobe Acrobat Reader, which is a free, trusted global standard for viewing PDFs. You can do...
How to change bearings
Bearings on unicycles generally last a long time; even when you take your unicycle in a fountain, or the sea, or just splashing around in the mud. They do give up in the end though; normally at the worst moment possible. You hear them grinding first, t...
Nimbus Unicycles Manufacturers Page
Nimbus Unicycles was started in 2001 and is the premier house brand of Unicycle.com.
The brand was started to help differentiate between our standard unicycles and the newer higher end unicycles we were designing in response to the requests fro...