29" Kris Holm Unicycle Frame - Black
New and improved KH Aluminium unicycle frame with stronger machine-butted seat tubes.
Clamp Size: 31.8mm
Seatpost Size: 27.2mm
Bearing Size: 42mm
KH frames balance the competing requirements of strength, weight, and stiffness, refined through years of evolution and testing by trials, muni, distance World Champions and backcountry adventurers.
Made from 7005 aluminum, the one-piece forged fork crown and neck incorporates the best characteristics of both flat top and rounded designs, with a stable platform and rounded corners to avoid bashed knees. Different tube diameters and sidewall thicknesses are used in different parts of the frame to optimize the strength-weight ratio.
The seatpost tube is closed at the bottom to prevent entry of mud. The fork blades are ovalized and stiff in both lateral and twisting directions - important for avoiding brake rub. The 24” and larger frames now come with only International Standard (IS) disk calliper mounts (right side) compatible with Spirit disk brake cranks.
Manufactured using 7005 T6 Aluminium featuring a one-piece forged fork crown and neck providing high strength-weight ratio and resistance to flex.
The Signature Rounded Square Crown curves the fork blades inwards at the top to achieve the best qualities of both fully square and fully round crown frames. This results in a narrow profile that won't bash your knees while providing sufficient tire clearance and a stable platform for tricks.
All welds are individually inspected at the factory, and every frame is checked in a test jig for proper alignment following welding and heat treatment.
Forged machined bearing holders ensure consistent press-fit of the bearings and improved durability. The asymmetrical external shape is optimized for KH Spirit, KH Moment and KH/Schlumpf hubs, and kept as narrow as possible to ensure room for your feet during flatland tricks (e.g. crank rolls). Hex bolts tighten from the bottom for easy access.
The seatpost tube fits a 27.2 mm diameter post, ensuring good resistance to twisting.
* 7005 T6 Aluminium alloy, machine-butted.
* weighs 737g.
* Black with high durability glossy clearcoat, laser-etched logo.
* Machined 42mm bearing housing.
* Fits 27.2mm diameter seatpost.
Supplied with bearing cups and bolts, but does not come with seatpost clamp.